Email Us Today: 
Call Us Toll Free: 
General Note:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
- Nominal Size. Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- Head Height. Tabulated head heights represent metal-to-metal measurements
Unit of Measure
Specifications
Product |
N/A Socket Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Diameter |
N/A 1/2 in |
Nominal Size or Basic Screw Diameter (Decimal) |
N/A 0.5000 in |
Max. Head Diameter (A) |
N/A 0.875 in |
Min. Head Diameter (A) |
N/A 0.851 in |
Max. Head Height (H) |
N/A 0.265 in |
Min. Head Height (H) |
N/A 0.245 in |
Ref. Head Side Height (S) |
N/A 0.046 in |
Nom. Spline Socket Size (M) |
N/A 0.372 in |
Nom. Hexagon Socket Size (J) |
N/A 5/16 in |
Nom. Hexagon Socket Size Decimal (J) |
N/A 0.312 in |
Min. Key Engagement (T) |
N/A 0.175 in |
Max. Fillet Transition Diameter (F) |
N/A 0.560 in |
Min. Fillet Transition Diameter (F) |
N/A 0.540 in |
Nom. Maximum Standard Length (L) |
N/A 2.00 in |
