Email Us Today: 
Call Us Toll Free: 
General Note:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
This product is designed and recommended for light fastening applications such as guards, hinges, etc. It is not suggested for use in critical high strength applications where socket head cap screws should normally be used.
Notes:
- Nominal Size. Where specifying nominal size in decimals, zeros preceding decimal and in the fourth decimal place shall be omitted.
- Head Height. Tabulated head heights represent metal-to-metal measurements
Unit of Measure
Specifications
Product |
N/A Socket Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Diameter |
N/A 3/8 in |
Nominal Size or Basic Screw Diameter (Decimal) |
N/A 0.3750 in |
Max. Head Diameter (A) |
N/A 0.656 in |
Min. Head Diameter (A) |
N/A 0.636 in |
Max. Head Height (H) |
N/A 0.199 in |
Min. Head Height (H) |
N/A 0.185 in |
Ref. Head Side Height (S) |
N/A 0.031 in |
Nom. Spline Socket Size (M) |
N/A 0.251 in |
Nom. Hexagon Socket Size (J) |
N/A 7/32 in |
Nom. Hexagon Socket Size Decimal (J) |
N/A 0.219 in |
Min. Key Engagement (T) |
N/A 0.122 in |
Max. Fillet Transition Diameter (F) |
N/A 0.415 in |
Min. Fillet Transition Diameter (F) |
N/A 0.405 in |
Nom. Maximum Standard Length (L) |
N/A 1.25 in |
