EmailEmail Us Today: info@salessystemsltd.comPhoneCall Us Toll Free: 800.368.3711
Reference Guide Only. Not Actual Inventory.
Sales Systems Limited Products and Services > Fasteners > Bolts / Screws > Slotted Cap Screws > Slotted Flat Countersunk Head Cap Screws > Item # SFCHCS05625XXX  
Download PDF Download PDF         Email Email This Page     Save To Favorites Save To Favorites

Item # SFCHCS05625XXX, Slotted Flat Countersunk Head Cap Screw, with 0.5625" Body Dia.

  • Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
  • Tabulated values were determined from the formula for maximum H
  • No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from the tabulated value, the protrusion will be affected accordingly, and the proper protrusion values shall be recalculated using the formulas shown in Appendix.

Manufacturer  · Specifications  · Codes and Standards



Industrial Fasteners Institute



Slotted Cap Screws

Unit of Measure


Nominal Size or Basic Screw Dia.

9/16 in

Nominal Size or Basic Screw Dia. (Decimal)

0.5625 in

Max. Body Dia. (E)

0.5625 in

Min. Body Dia. (E)

0.5550 in

Max. Edge Sharp Head Dia. (A)

1.000 in

Min. Edge Rounded or Flat Head Dia. (A)

0.906 in

Ref. Head Height (H)

0.244 in

Max. Slot Width (J)

0.118 in

Min. Slot Width (J)

0.102 in

Max. Slot Depth (T)

0.120 in

Min. Slot Depth (T)

0.080 in

Max. Fillet Radius (U)

0.225 in

Max. Protrusion Above Gaging Dia. (F)

0.078 in

Min. Protrusion Above Gaging Dia. (F)

0.054 in

Gaging Dia. (G)

0.869 in

Codes and Standards

Codes and Standards

ASME B18.6.2 1998

Distributor of Industry Standard and Military Specification Threaded Fasteners