Email Us Today: 
Call Us Toll Free: 
- Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
- Tabulated values were determined from the formula for maximum H
- No tolerance for gaging diameter is given. If the gaging diameter of the gage used differs from the tabulated value, the protrusion will be affected accordingly, and the proper protrusion values shall be recalculated using the formulas shown in Appendix.
Unit of Measure
Specifications
Product |
N/A Slotted Cap Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Dia. |
N/A 9/16 in |
Nominal Size or Basic Screw Dia. (Decimal) |
N/A 0.5625 in |
Max. Body Dia. (E) |
N/A 0.5625 in |
Min. Body Dia. (E) |
N/A 0.5550 in |
Max. Edge Sharp Head Dia. (A) |
N/A 1.000 in |
Min. Edge Rounded or Flat Head Dia. (A) |
N/A 0.906 in |
Ref. Head Height (H) |
N/A 0.244 in |
Max. Slot Width (J) |
N/A 0.118 in |
Min. Slot Width (J) |
N/A 0.102 in |
Max. Slot Depth (T) |
N/A 0.120 in |
Min. Slot Depth (T) |
N/A 0.080 in |
Max. Fillet Radius (U) |
N/A 0.225 in |
Max. Protrusion Above Gaging Dia. (F) |
N/A 0.078 in |
Min. Protrusion Above Gaging Dia. (F) |
N/A 0.054 in |
Gaging Dia. (G) |
N/A 0.869 in |
