Email Us Today: 
Call Us Toll Free: 
- A light rounding of the edges at the periphery of the head shall be permissible provided the diameter of the bearing circle is equal to no less than 90 percent of the specified minimum head diameter.
- Where specifying nominal size in decimals, zeros preceding the decimal and in the fourth decimal place shall be omitted.
- Formulas for head dimensions are given in Appendix.
Unit of Measure
Specifications
Product |
N/A Slotted Cap Screws |
Unit of Measure |
N/A English |
Nominal Size or Basic Screw Dia. |
N/A 5/8 in |
| Nominal Size or Basic Screw Dia. (Decimal)1 | N/A 0.6250 in |
Max. Body Dia. (E) |
N/A 0.6250 in |
Min. Body Dia. (E) |
N/A 0.6170 in |
Max. Head Dia. (A) |
N/A 0.875 in |
Min. Head Dia. (A) |
N/A 0.853 in |
Max. Head Side Height (H) |
N/A 0.422 in |
Min. Head Side Height (H) |
N/A 0.391 in |
Max. Total Head Height (O) |
N/A 0.521 in |
Min. Total Head Height (O) |
N/A 0.478 in |
Max. Slot Width (J) |
N/A 0.133 in |
Min. Slot Width (J) |
N/A 0.116 in |
Max. Slot Depth (T) |
N/A 0.239 in |
Min. Slot Depth (T) |
N/A 0.189 in |
Max. Fillet Radius (U) |
N/A 0.062 in |
Min. Fillet Radius (U) |
N/A 0.031 in |
- 1 Where specifying nominal size in decimals, zeros preceding and in the fourth decimal, place shall be omitted.
